Description
A new encapsulation process is now in production using water based protective conformal coating while maintaining performance and flexibility. The new method involves placing on the back of the cell, over the protective coating, a double sided yellow thin foam adhesive tape that adds a degree of rigidity to the flexible cell. The customer has the option to remove one of the protective layers of yellow tape and place on a more rigid backing.
Triple-Junction Cell Specification
- 177 mm x 40 mm X 1 mm thick
- Output 300 mA at 1.5 V (stable)
- Flexible
- Weight: 11g with pinch terminals
- Waterproof, high power/weight ratio
- Durable, 20+ year useful life
- Responds to diffuse light (light scattered by cloud cover)
- Pinch terminal connections allows for easy connection to devices
- Performance and Characterisation
Support Technical Documents
Source of Solar Car Components
Recycled mobile phone sim and credit cards are used for constructing the front and rear assembly components
The manufacture of amorphous silicon cells is very different from that of crystalline cells. The silicon is deposited as a thin film on a substrate, usually either stainless steel or a glass sheet covered with a layer of tin oxide acting as a transparent contact. The process used for depositing amorphous silicon lends itself well to mass production techniques.
The solar-active cell is a spectrum-splitting cell, constructed of three separate p-i-n type, amorphous semiconductor solar sub-cells, each with a different spectral response characteristic. In this way, the cell can convert the different visible and near infrared wavelengths of sunlight with optimal efficiency.
Assembly kits, activities & experiments
- Model single and double cell car and boat
- Solar Lorry Kit
- Hyrdofoil kit
- Electric circuit investigations, parallel, series, voltage, current, resistance and electro magnetism
- Solar Clock Kit
- Solar Light & Sound: buzzers, bulbs & LEDs
- Miniature Solar Water Pump
Source of Solar Car Components
Recycled mobile phone sim and credit cards are used for constructing the front and rear assembly components
The manufacture of amorphous silicon cells is very different from that of crystalline cells. The silicon is deposited as a thin film on a substrate, usually either stainless steel or a glass sheet covered with a layer of tin oxide acting as a transparent contact. The process used for depositing amorphous silicon lends itself well to mass production techniques.
The solar-active cell is a spectrum-splitting cell, constructed of three separate p-i-n type, amorphous semiconductor solar sub-cells, each with a different spectral response characteristic. In this way, the cell can convert the different visible and near infrared wavelengths of sunlight with optimal efficiency.
Packaging Statement
The source of our tube packaging is from recycling the inner core of carpets and packaging cellophane. All components are in paper bags.